Leírás
TIGER 402 CNC HR 4.0 RC, non-ferrous circular saw with TCT blade for aluminium and alloys, with programmable head mitering trough MEP CNC 40 controller.
– Automatic vertical circular saw powered by brushless motor mitering from -45° to +45° (see picture A) and up to +60° in semiautomatic mode. This machine can be equipped with the bar loader CB6001 (OPTIONAL) for rounds, square and rectangle materials according to technical specifications. It can also be retrofitted.
– TIGER 402 CNC HR 4.0 is completely covered to give safety to the operator (during working cycles, access to cutting area is hindered by a timed opening system) and for sound insulation.
A FEW FEATURES:
– 8” touch screen controller with self learning programming.
– Saw head mitering with high precision positioning (max 1’ of degree) powered by a brushless motor and pneumatic locking of saw head once positioned.
– Self-checking of all cutting parameters in real time.
– The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.
– Sawing head movement on double linear guide with preloaded slides with recirculating ballscrews.
– The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel.
– Head down stroke by means of electromechanical cylinder to obtain the maximum cutting rigidity.
– Shearing stress control.
– Transmission system with serrated pulleys and belts.
– Blade rotation with 2-speed motor at 1400/2800 rpm.
– Automatic device to lubricate the blade only when the machine is cutting.
– Rotation pin with thrust bearing to grant rotation precision and stability.
– Bar feeder has a length of 1000 mm and consists in a system given by screw/nut with recirculating ballscrews with stepper motor and vice with sideways movement so as to feed in also deformed bars.
– Machine base with chip tray and equipped to connect chip collector (optional).
– Pneumatic double locking vice.
– Pneumatic vertical vice.
– Indicator with flashing light in case cycle is stopped.
– Machine arranged for handling with movement equipment.
– Circular blade Ø 400 mm.
– Service keys and instructions manual for maintenance and spare parts list.
MŰSZAKI ADATOK:
A katalógus letöltéséhez klikkeljen ide.
